Request a Quote (407) 706-5650

Exterior care · 2026-12-01 · admin

Caring for a Cirrus SR22’s Exterior Finish

Composite airframe, CAPS cover, TKS panels, big windows: the SR22-specific things to know before anyone washes, polishes or coats the aircraft.

Cirrus aircraft are everywhere in Central Florida, and they’re among the most rewarding to detail: the composite finish takes a correction and a coating beautifully, and owners tend to notice. They also have a short list of areas where the wrong move is expensive. This is the SR20/SR22 owner’s version of the conversation we have at the hangar door.

The finish is paint over composite

Cirrus airframes are composite with a painted finish. Compared with paint over aluminum, composite holds heat under a polisher and can show the texture of the structure beneath (print-through) if worked too hard or too hot. Polishing and correction are done with lower speeds and pressure, with more frequent checks, and after an evaluation panel by panel. The upside is that a well-prepared composite finish is an excellent base for a ceramic coating.

Hands-off areas

  • CAPS cover. The parachute cover on the aft fuselage is cleaned by hand with mild product only. No pressure, no polish, no coating, nothing applied around its seams.
  • TKS panels. On FIKI and inadvertent-icing aircraft the porous leading-edge panels are never waxed, polished or coated. Any product that fills the pores affects the system. They’re masked during protection work and cleaned only as the system’s guidance permits.
  • Static ports, pitot, OAT probe, stall-warning vane. Covered before any water; verified clear afterward and noted on the report.
  • Antennas and the aft fuselage strakes. Hand-cleaned, not polished.

Windows

Large side windows and a big windscreen, all acrylic. Rinse first so grit floats off, acrylic-safe cleaner, clean microfiber, straight strokes. No paper, no ammonia, no dry wiping. Crazed or hazed windows are a separate conversation.

Bugs on the leading edge

The SR22 flies fast and low enough to collect a remarkable number of insects, and the leading edge is the first thing anyone sees on the ramp. In bug season, residue needs to come off within a day or two; a coated leading edge (on non-TKS aircraft) makes that a wipe rather than a scrub. See bug and exhaust residue removal.

Interior notes

Leather and the Perspective displays. Leather gets a pH-appropriate cleaner and a conditioner; the displays are only ever wiped dry or barely damp, on your instruction, never sprayed. Our Cirrus detailing page has the full list.

A sensible Cirrus care program

  1. Full detail and finish evaluation
  2. Paint correction if the evaluation calls for it
  3. Ceramic coating on eligible painted surfaces
  4. Monthly maintenance washes with leading-edge attention in season
  5. Interior every second visit
  6. Finish check every six months

Which is, more or less, the Captain’s Signature plan.

About this article. Written by the LUXE Aero Spa team for general aviation owners in Central Florida. It describes cosmetic appearance care only and is not maintenance guidance; follow your aircraft's manufacturer care instructions and consult your mechanic for anything beyond cleaning.

Rather have it done for you?

One-time detailing or a recurring care plan, scoped to your aircraft.