Aircraft detailing
Aircraft Ceramic Coatings in Orlando
A ceramic coating is a hard, bonded layer over prepared paint that makes bugs, exhaust and water let go more easily and slows UV dulling. It's the best tool we have against Florida — applied to the right surfaces, on properly prepared paint.
Ceramic coatings have earned their reputation on aircraft for a simple reason: the things that make a Florida airplane hard to keep clean — baked-on bugs, exhaust soot, mineral spotting from afternoon rain, pollen film — bond to a coated surface far less than to bare or waxed paint. Washing gets faster and gentler, and the finish holds its gloss through more summers than it otherwise would.
The coating itself is the last ten percent of the job. The rest is preparation: a full wash and chemical decontamination, paint correction to whatever level the paint needs and will tolerate, a panel wipe to strip every trace of oil, then coating in a controlled hangar environment and a cure period during which the aircraft stays dry and hangared. Skipping the preparation locks defects under the coating.
Compatibility is checked for your aircraft and finish, and the coating is applied to painted surfaces only. Windows, de-ice boots, bare metal, rubber, seals, sensors and anything around static ports and probes are masked and left uncoated. Composite and gelcoat finishes are evaluated separately.

What's included
- Finish evaluation and compatibility check for your aircraft and paint
- Full wash, chemical and mechanical decontamination
- Paint correction to the agreed level (quoted with the coating)
- Masking of windows, boots, bare metal, seals, sensors, placards and openings
- Panel wipe
- Coating applied to eligible painted surfaces in a controlled environment
- Cure period with the aircraft hangared and dry; written aftercare guidance
- Documentation of the coating used, date and coverage for your records
How the service runs
Evaluate the finish and confirm eligibility
Wash and decontaminate
Correct the paint
Mask
Panel wipe
Apply the coating, panel by panel
Cure, inspect, document
Benefits to the owner
- Bugs, exhaust and water spots release with far less effort
- Slows the UV oxidation that dulls Florida aircraft
- Gloss that lasts through more than one season
- Lower long-term cost through faster washes and longer intervals between corrections
Suitable aircraft
- Painted aluminum aircraft from Cessna, Piper, Beechcraft, Mooney and others
- Composite aircraft including Cirrus and Diamond, with finish-appropriate preparation
- Turboprops and light jets by arrangement
Limitations and compatibility
- Not permanent: coatings wear with washing, weather and flight hours and need maintenance washes and eventual renewal
- Not a shield against rock chips, hangar rash, scratches or corrosion already present
- Not applied to windows, boots, bare metal, rubber or sensor areas
- Performance depends on preparation, cure conditions and aftercare; we don't promise a specific lifespan
- Some finishes and some manufacturers' guidance restrict coatings — eligibility is confirmed per aircraft
When to schedule
After paint correction, ideally in cooler, drier months so the cure is easy to manage, and well before love bug season. Freshly painted aircraft should wait until the paint shop says the finish is fully cured.
Further reading
Questions aircraft owners ask
How long does an aircraft ceramic coating last?
It depends on the product, the preparation, how the aircraft is stored and how it's washed. Coatings degrade gradually rather than failing on a date. We document what was applied and recommend a maintenance schedule rather than quoting a guaranteed number of years.
Can you coat the windows?
No. Acrylic windows are masked and cleaned separately with acrylic-safe product. Some owners ask about dedicated glass or acrylic treatments; we'll discuss those on request but they are not part of the paint coating.
Does a coated aircraft still need washing?
Yes — more easily and less often, but it still needs washing, and washing it correctly is what makes the coating last. Our care plans are built around this.
Will it affect the aircraft in any way beyond appearance?
A coating is a cosmetic surface treatment on painted areas only. It is not a maintenance action and we do not apply it to any component where the manufacturer's guidance restricts surface treatments.
Is it worth it on an older aircraft?
Often, if the paint is sound. If the paint is failing, the money is better spent on the paint shop first. The evaluation tells us which situation you're in.
Ready for a flight-ready finish?
Tell us about your aircraft and we'll come back with a scope, a schedule and a quote — one-time or recurring.